28 July 2015

Lowongan kerja untuk TAR Technical Support Project


JOB VACANCY

EJJV Indonesia is a world class integrated Engineering, Construction, Commissioning, Installation, start-up and production services provider working with our clients to add value to their projects. We aim to meet the needs of our clients with quality, efficiency, and cost effectiveness  and deliver outstanding corporate and operational performance, leveraging on the full strength of our capabilities and assets, geographical presence, and people.

Currently we are looking for motivated person and target progress oriented to join and fill the positions as follows:

Mechanical Static Planner, Qualification :


D3 – Mechanical Engineering
3 Years or 2 TARs experience as static planner/project/planning engineer in TAR or green/brown fields project within oil&gas industry
Possession of good working knowledge on P&Ids piping line & valve configuration, components and consumables, process isolation/de-isolation, vessel/heat exchanger components and clean up, leak test, lock out and tag out, welding, applicable codes (e.g. ASME, ASTM,ANSI,etc)
Proficient with static material commodity (e.g piping, gasket, flange, blind, piping support,etc) work execution and test plan
Computer literacy (e.g spread sheet, word processor, MS Project)

2. Rotating Planner, Qualification :

D3 – Mechanical Engineering
3 Years or 2 TARs experience as rotating planner/project/planning engineer in TAR or green/brown fields project within oil&gas industry
Possession of good working knowledge on P&Ids gas turbine & compressor configuration/ components, pumps, process isolation/de-isolation, lock out and tag out, rotating equipment consumables, applicable codes (e.g. ASME, ASTM,ANSI,etc)
Proficient with gas turbine, compressor and pump components, work execution and test plan
Computer literacy (e.g spread sheet, word processor, MS Project)

3.  Electrical/Instrumentation Planner, Qualification :

D3 – Mechanical Engineering
3 Years or 2 TARs experience as electrical or instrumentation planner/project/planning engineer in TAR or green/brown fields project within oil&gas industry
Possession of good working knowledge on P&Ids & single line diagrams, control system (e.g. temperature, vibration, pressure, level control, etc) low medium voltage electrical configuration, instrumentation/electrical consumables, lock out and tag out, electrical isolation/de-isolation, PSV, control valves (including actuators) measuring device calibration, applicable codes (e.g. IEC, API)
Proficient with electrical/instrumentation material commodity (e.q sensors, control valve components, cabling/wiring, tubing, panels,etc)  work execution and test plan
Computer literacy (e.g spread sheet, word processor, MS Project)


4. Civil Planner, Qualification :

D3 – Mechanical Engineering
3 Years or 2 TARs experience as civil planner/project/planning engineer in TAR or green/brown fields project within oil&gas industry
Possession of good working knowledge on scaffolding, insulation (hot&cold) civil work (e.g. earthwork, concrete) bund wall containment, painting, applicable codes(e.g. JIS-Scaffolding, SNI, PBI, AISC)
Proficient with civil, scaffolding, insulation, painting material commodity,  work execution and test plan
Computer literacy (e.g spread sheet, word processor, MS Project)

5. Lifting Planner,  Qualification :

D3 – Mechanical Engineering
3 Years or 2 TARs experience as lifting planner/project/planning engineer in TAR or green/brown fields project within oil&gas industry
Proficient with various lifting methods (e.g mobile crane, overhead crane, pedestal crane, chain blocks, etc) including associated risks and mitigation plan, lifting gears (e.g. slings, pad eyes, shackles, etc) lifting plan development, load chart reading, lifting equipment and gear selection
Computer literacy (e.g spread sheet, word processor, AutoCad)

6. Scheduler, Qualification :

D3 – Engineering
5 Years relevants experience as scheduler in TAR or green/brown fields project
Possession of good working knowledge on various field work methodology, critical path method, resource loading plan, progress measurement, reporting
Computer literacy (e.g spread sheet, word processor, MS Project, Primavera)
Primavera training certification required

7.Drafter, Qualification :


Senior High School or Equivalent
5 years relevant experience in applicable design drafting
Computer literacy (e.g spread sheet, word processor, AutoCad)
AutoCad training certification required

8. Job Officer, Qualification

D3 – Engineering (e.g mechanical or civil or electrical or instrumentation)
8 Years relevant experience in oil&gas industry, including 4 years or 4 TARs experience as field supervisor in TAR or green/brown fields projects
Possession of good working knowledge on various field work methodology and supervisory, lifting plan, constructability review, job risks assessment and mitigation plan, plant system handover methodology , field resource management

9. GoC Officer, Qualification :

D3 – Engineering (e.g mechanical or civil or electrical or instrumentation)
3 Years or 2 TARs experience as field QA/QC representative/supervisor in TAR or green/brown fields projects within oil&gas industry
Possession of good working knowledge on applicable codes/standards, InspectionTest Plan (ITP), QA plan system handover methodology (including commissioning and start-up work process) handover package development (final dossier)
Computer literacy (e.g spread sheet, word processor)

10. GoC Administrator , Qualification :

D3 – Engineering (e.g mechanical or civil or electrical or instrumentation)
3 Years or 2 TARs experience as field QA/QC representative/supervisor in TAR or green/brown fields projects within oil&gas industry
Possession of good working knowledge on Inspection Test Plan (ITP), field QAQC checklist and records, handover package development (final dossier)
Computer literacy (e.g spread sheet, word processor)

11. Material Officer, Qualification :

D3 – Engineering
5 Years relevant experience in oil&gas industry, including 3 years as field material cordinator in TAR or green/brown fields projects
Possession of good working knowledge on site material receiving, movement, delivery and reconciliation methodology
Computer literacy (e.g spread sheet, word processor)

12. Material Administrator , Qualification :


Senior High School or Equivalent
3 Years relevant experience as field material administrator in TAR or green/brown fields projects
Possession of good working knowledge on site material traceability from receiving, movement and reconciliation
Computer literacy (e.g spread sheet)

13. Material Man, Qualification :


Senior High School or Equivalent
3 Years relevant experience as material man in TAR or green/brown fields projects
Possession of good working knowledge on site material movement/delivery and storage, applicable material commodity, tagging/bagging
Computer literacy (e.g spread sheet)

14. Logistics & Document Controller, Qualification :


Senior High School or Equivalent
2 Years relevant experience as project or operation administrative assistant covering personnel logistic, formalities and document control
Possession of good working knowledge document submission, filing and transmittal
Computer literacy (e.g spread sheet, word processor)
Open For Local Papuan

If you feel that you can meet the above qualification and would like to be part of us ;

1. Please send your application only in Ms. Word Format
2. Please send your last Certificate of Education
3. Please send your Competencies Certificate  
To : hrd@ejjv.net

Thanks,
HRD Dept.
PT EJJV Engineering Indonesia
Adhi Graha Building Lt.12. Jl.Jend.Gatot Subroto Kav.56 Jakarta 12950
Phone. 021-57930878 Fax. 021-57930877

03 July 2015

Open Vacancies PT. Encona Inti Industri

Dear all,


PT. Encona Inti Industry, a Company with Engineering, Construction and Petroleum Services in Industrial Plant and Oil & Gas Industry are seeking a suitable candidates for our current project.


1. Junior Architect (JAE)


Responsibiltities:

 Shall assist in the Architectural engineering and design


Job Requirements

• Must have at least a Bachelor of Science degree in Architect and at least five (5) years of applicable experience in the design and construction of oil and gas facilities.

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs


2. Junior Civil / Structure Engineer (JCE)



Responsibiltities:

 Shall assist in the civil/structural engineering and design


Job Requirements

• Must have at least a Bachelor of Science degree in Civil/Structural Engineering and at least five (5) years of applicable experience in the design and construction of oil and gas facilities.

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs


3. Structure Drafter (PDD)

Responsibiltities:

• Participate in the civil engineering and design such as to prepare plot plan and detailed engineering drawing for site work, site development, grading design, road & drainage.

• Participate in the structure engineering and design such as to prepare plot plan and detailed engineering drawing for  general foundation, steel/concrete structure, pipe rack/bridge, cable duct, building, etc.


Job Requirements:

Must have at least a Technical School, Diploma, Bachelor degree in Civil and or CAD and at least two (2) years of applicable experience in the design and construction of site development, foundation and superstructure work for oil & gas, power plant, or industrial plant facilities. Especialy for Civil Drafter must be experienced in the use of computer programs applicable to such designs; AutoCad Civil 3D and Land Desktop Development


4. SENIOR MECHANICAL STATIC ENGINEER (SSE)


Responsibilities:

• Prepare mechanical design and check engineering procedures, specifications and standards.

• Review MTO and cost estimate

• Evaluate and establish Long Lead Items List for equipment packages and equipment criticality

• Prepare and check the basis of design, specifications, data sheets, requisitions, technical bid evaluations, and drawings.

• Provide technical recommendations on the selection of equipment to meet Project requirements.

• Check and review vendor proposals, documentation and drawings.

• Participate in project, client and vendor meetings.

• Provide Input to Construction Sub Contract and evaluate bids

Job requirements:

• Must each have at least a Bachelor of Science degree in Mechanical Engineering and the overall experience should be twelve (12) years and at least eight (8) years total experience, including seven (7) years minimum experience in engineering of oil and gas projects,

• Be able to demonstrate a track record in the design, specification and engineering of Pressure Vessels (PD5500 / ASME VIII), Heat Exchangers (TEMA) and Storage Tanks, etc

• Be computer literate and have working knowledge of design software and databases.



5. JUNIOR MECHANICAL STATIC ENGINEER (JSE)

Responsibilities:

• Shall assist in the Mechanical engineering and design


Job requirements:

• Must have at least a Bachelor of Science degree in Mechanical Engineering and at least five (5) years of applicable experience in the design and construction of oil and gas facilities, including mechanical equipment and lay out

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs



6. Mechanical Drafter (PDD)


Responsibilities:

• Participate in the mechanical engineering and design such as to prepare mechanical upstream and downstream plot plan and detailed engineering drawing for site work, utilities, building, etc.


Job Requirements:

• Must have at least a Technical School, Diploma, Bachelor degree in Electrical and or CAD and at least two (2) years of applicable experience in the design and construction of oil & gas, power plant, or industrial plant facilities, for foundation and superstructure work. Mechanical Drafter must be experienced in the use of computer programs applicable to such designs (CAD).


7. SENIOR MECHANICAL ROTATING ENGINEER (SRE)


Responsibilities:

• Prepare mechanical design and check engineering procedures, specifications and standards.

• Review MTO and cost estimate

• Evaluate and establish Long Lead Items List for equipment packages and equipment criticality

• Prepare and check the basis of design, specifications, data sheets, requisitions, technical bid evaluations, and drawings.

• Provide technical recommendations on the selection of equipment to meet Project requirements.

• Check and review vendor proposals, documentation and drawings.

• Participate in project, client and vendor meetings.

• Provide Input to Construction Sub Contract and evaluate bids


Job Requirements:

• Must each have at least a Bachelor of Science degree in Mechanical Engineering and the over all experience should be twelve (12) years and at least eight (8) years total experience, including seven (7) years minimum experience in engineering of oil and gas projects,

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs



8. JUNIOR ELECTRICAL ENGINEER (JEE)



Responsibilities:

• Shall assist in the electrical engineering and design


Job Requirements:

• Must have at least a Bachelor of Science degree in Electrical Engineering and at least five (5) years of applicable experience in the design and construction of oil and gas facilities, including electrical equipment and lay out

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs


9. ELECTRICAL DRAFTER (PDD)


Responsibilities:

• Participate in the electrical engineering and design such as to prepare electrical upstream and down stream plot plan and detailed engineering drawing for site work, utilities, building, etc.


Job Requirements:

• Must have at least a Technical School, Diploma, Bachelor degree in Electrical and or CAD and at least two (2) years of applicable experience in the design and construction of oil & gas, power plant, or industrial plant facilities, for foundation and superstructure work. Electrical Drafter must be experienced in the use of computer programs applicable to such designs (CAD).


10. JUNIOR INSTRUMENT ENGINEER (SIE)


Responsibilities:

• Shall assist in the Instrument engineering and design Work


Job Requirements:

• Must have at least a Bachelor of Science degree in Electrical Engineering, Electronic, or Engineering Physics and at least five (5) years of applicable experience in the design and construction of oil and gas facilities.

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs



11. JUNIOR PROCESS ENGINEER (JPC)

Responsibilities:

• Shall assist in the process engineering and design Work


Job Requirements:

• Must have at least a Bachelor of Science degree in Chemical Engineering and at least five (5) years of applicable experience in the design and construction of oil and gas facilities.

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs.


12. SENIOR PIPING ENGINEER (SPE)


Responsibilities:

• Shall develop piping layout design concepts, project piping and valve specifications, perform piping stress calculations, and implement Government regulations and industry codes and standards.

• Shall be responsible for all piping engineering and construction activities for the full duration of the Work


Job Requirements:

• Must have at least a Bachelor of Science degree in Mechanical Engineering and the over all experience should be twelve (12) years and at least eight (8) years total experience, including five (5) years minimum experience in engineering and construction of oil and gas projects, including piping systems, plot plans, and equipment layouts.

• Must have a working knowledge of applicable codes and standards and must have each been responsible, as principle engineers, for the piping engineering and design of at least one other project with similar equipment and mechanical systems

• Must be experienced in the use of computer programs applicable to such designs; HYSIS, CESAR, etc

• Shall have participated in at least two (2) successful EPCI project , as Lead Engineer, within the last six (6) years and must have demonstrated ability to coordinate and supervise piping engineering and design personnel and interface with other the engineering disciplines.


13. JUNIOR PIPING ENGINEER (JPE)



Responsibilities:

• Shall assist in the piping engineering and design


Job Requirements:

• Must have at least a Bachelor of Science degree in Mechanical Engineering and at least five (5) years of applicable experience in the design and construction of oil and gas facilities, including piping and equipment lay out.

• Must be familiar with the applicable codes and standards and must be experienced in the use of computer programs applicable to such designs; HYSIS, CESAR, etc


If you interest in join us, kindly send your updated resume to hrd@encona.co.id with subject: "position – job portal" (ex: Junior Architect (JAE) – lowonganmigas) or submit through our  website http :// jobs.encona. co. id

Only shortlisted candidates will be contacted for further processing.

URGENTLY REQUIRED - INTERNAL AUDIT OFFICER


PT Gunanusa Utama Fabricators is a leading constructor of oil and gas platforms in Indonesia. To date, the company has successfully completed more than 100 offshore structures such as production, compression, wellhead platforms/modules and jackets. Our major clients are Total, BP, Caltex/Unocal/Chevron, Kodeco, MAXUS, Conoco Phillips, HESS etc. Our health, safety and environment (HSE) management system conforms to the stringent requirements of all our clients and we have also obtain certification for ISO 9001:2008, ISO 14001-2004 and OHSAS 18001-2007. The company is also certified for U, U2 and S Stamps for the manufacture of pressure vessels and boilers.

For visit our website: www. gunanusautama. co. id

Currently we are looking for motivated persons and target progress oriented to join and fill the position as INTERNAL AUDIT OFFICER
Requirements:
ü  Male and Female
ü   Bachelor Degree in Accounting from reputable University
ü  Bachelor Degree in Engineering/Technical from reputable University
ü  Have 1 (one) year experience as Internal Audit
ü  Good command in English both spoken and written is mandatory
ü  Team Player, good communication skill and interested in Internal Audit
ü  Willing to be assigned in our Yard Office, Cilegon
ü  Good analytical skill
ü  Fresh graduate are welcome to apply

If you meet the requirements, please submit your update CV, recent photograph by email to hrd@gunanusa.co.id  

Only shortlisted candidate will be contacted for further process

LOOK FOR IT Programmer to develop company website

Lowongan IT Programmer
 

PT. EPICENTRUM REKAYASA TEKNIK, a company that engage service in Oil & Gas Industry now is looking for highly potential, dynamic, and smart people to take up the following challenge for specific position :

1. IT Programmer / IT developer

(Jakarta Raya)

 

Responsibilities:

* develop the company web site and security service provider ETC.

 

General Qualification:

1.  Male ,age max 30 years old

2.  Education, Sarjana degree from reputable university, in teknik informatika/computerize with minimum 1-3 years experience in

3.  Certified in field related

4.  Excellent in English communication (writing & speaking)

5. Able to develop & maintenance , secure the web system.

 

If you meet the required specification, please submit your application letter and enclose your Ijazah, ,CV, Certificate, and recent photograph, both hard copy and soft copy before July 30,  2015 to:

 

HRD Department

PT. EPICENTRUM REKAYASA TEKNIK

Jl. Petogogan 1 No. 57 Kebayoran Baru, Jakarta Selatan INDONESIA 12160


Email : sintia@sii.satoro-energy.com and/or maftukhin@sii.satoro-energy.com


Ingin tau info lowongan terbaru di facebookmu?

Ingin tau info lowongan terbaru di facebookmu?
Join Sekarang Di Facebookmu!